SP Vibro

SunPeak Labs

Part number:SP790

Wireless vibration
level logger

Smart wireless vibration logger with range up to 4g. Automatically enables continuous recording when threshold is exceeded and stores data in memory during connectivity loss, ensuring reliable predictive equipment maintenance.

SP Vibro — Wireless vibration level logger

Key features

  • Vibration analysis up to 4g
  • Intelligent trigger (> 0.04g)
  • Autonomous operation up to 5 years
  • Sealed industrial enclosure IP65
  • Rigid surface mounting
  • LoRaWAN range up to 5 km

Protect structures from vibration loads

  • Worldwide Helium Network compatibility
  • Ready to work out of the box
  • 3 years warranty period

How it works?

SP Vibro system diagram: sensors connect to the SP Vibro logger, which relays data over LoRaWAN to SP SmartCloud

Use Cases

Predictive equipment maintenanceIndustrial equipment monitoring. The logger continuously analyzes vibration level and starts recording only when the threshold of 1% (0.04g) is exceeded. This enables early detection of imbalance, bearing wear or loose fasteners, preventing costly downtime.

Structural monitoringContinuous structural health monitoring (SHM). SP Vibro captures dangerous resonances and anthropogenic vibrations.

Ventilation and HVACUsing SP Vibro you can anticipate gradual rise in average vibration level indicating initial bearing degradation, which can still be addressed economically.

Transport infrastructureRail load for urban or intercity transport can be analyzed with reference to timing and schedule of vehicle passages, revealing running gear issues in advance and reducing maintenance costs for both vehicles and tracks.

Technical specifications

The warranty period is 3 years from the logger production date. Battery life depends on frequency and duration of vibration events.

Technical specifications
Measurement rangeup to 4g
Trigger threshold> 0.04g (1% of limit)
Operating logicEvent-driven + Buffering (Store & Forward)
Power source3.6V 2400mAh ER14505
Protection and mountingIP65 / M4 screws

SmartCloud ecosystem

No data lossThanks to built-in memory, SmartCloud always receives a continuous vibration event graph with accurate timestamps even if LoRaWAN interference occurred during the event.

Vibration analyticsThe platform builds vibration intensity charts over time. This allows engineers to detect anomalies and plan maintenance before equipment fails.

Instant alertsConfigure multi-level alarms: yellow level (warning for rising vibration) and red level (critical exceedance).

SP Vibro — documents and ordering

SP Vibro — frequently asked questions

How long does the battery last?

SP Vibro runs on 3.6V 2400mAh ER14505. Battery life depends on the reporting interval and data rate configured for the device.

Can SP Vibro be installed outdoors?

The protection and mounting of SP Vibro is: IP65 / M4 screws.

What is the part number for SP Vibro?

SP Vibro (Wireless vibration level logger) is ordered from SunPeak Innovations under part number SP790.

Where is SP Vibro used?

SP Vibro is deployed in Predictive equipment maintenance, Structural monitoring, Ventilation and HVAC and Transport infrastructure.