SP Thermo
Wireless non-contact
infrared thermometer
Measure the temperature of hot, moving or hard-to-reach objects without contact. SP Thermo reads the object surface with an infrared sensor, reports every change above the threshold at once and sends a regular heartbeat — for years on one battery.

Key features
Non-contact infrared object temperature
Ambient temperature in the same reading
Reports every change above the threshold at once
LoRaWAN or SP Net gateway, up to 5 km
Up to 5 years on one battery
Plug & Play in SmartCloud
Temperature without touching
Worldwide Helium Network compatibility
Ready to work out of the box
3 years warranty period
Use Cases
Electrical cabinets and switchgearAimed at one connection, SP Thermo reads its temperature without touching live parts and reports a rise at once, so a loosening contact is found before it burns.
Motors, bearings and pumpsNon-contact measurement works where a probe cannot be fixed: a rotating shaft, a bearing housing, a conveyor. SmartCloud compares the object with the ambient temperature measured in the same reading.
Food and process controlCheck the temperature of products on a line, an oven wall or a heat exchanger without contact and without breaking hygiene.
Hard-to-reach placesPipelines, tanks and units under the ceiling: the sensor is fixed nearby and looks at the object; data goes over the radio for years without service.
Technical specifications
The warranty period is 3 years from the production date.
| Infrared thermometer Melexis MLX90614, factory calibrated | |
| Object surface temperature and ambient temperature, 0.01 °C in the radio frame | |
| Measurement every 10 min, heartbeat every 30 min, a frame at once when the object temperature changes by 0.5 °C or more; all configurable | |
| LoRaWAN 1.0.4 Class A (OTAA/ABP), EU868, or SP Net single-channel gateway | |
| up to 5 km (line-of-sight) | |
| 3.6 V 2400 mAh ER14505 Li-SOCl₂ | |
| up to 5 years (depends on the reporting profile) | |
| about 100 × 50 × 29 mm including the sensor tube |
SmartCloud Ecosystem
Cloud ReadyPlug & Play activation: register the device, aim it at the object — readings appear in SmartCloud right away.
Alarm thresholdsSet high and low limits for the object or for its difference from ambient; SmartCloud raises an alarm and notifies by Telegram or SMS.
Control LogicCombine SP Thermo with the SP Act relay: switch off a heater or start a fan when the object gets too hot.
History and reportsCharts, exports and reports for audits; the same values can be shown on an SP Screen board next to the equipment.
SP Thermo — documents and ordering
SP Thermo — frequently asked questions
What does SP Thermo measure?
The temperature of the object surface it is aimed at, measured by infrared without contact, and the ambient temperature around the sensor — both in every reading.
How often does it report?
By default it measures every 10 minutes, sends a heartbeat every 30 minutes and sends a frame at once when the object temperature changes by 0.5 °C or more. Intervals and the threshold are set in your device profile.
Can it raise alarms?
Alarm limits are set in SmartCloud: when a reported value crosses a limit, SmartCloud raises an alarm and notifies your team. The sensor itself reports every significant change at once.
Does it work through glass?
No. Infrared does not pass through glass or plastic windows; the sensor must see the object directly. Shiny metal reflects the surroundings — put a matt label on it for a correct reading.
How long does the battery last?
Up to 5 years with the default profile; more frequent reporting shortens the life. SmartCloud shows the battery level of every device.
Is SP Thermo compatible with standard LoRaWAN networks?
Yes: LoRaWAN 1.0.4 Class A (OTAA/ABP) with any compliant network server, including Helium, and the SP Net single-channel gateway where there is no LoRaWAN coverage.
What is the part number?
SP Thermo (wireless non-contact infrared thermometer) is ordered from SunPeak Innovations under part number SP720.




