SP Screen

SunPeak Labs

Part number:SP967

Wireless e-ink
display 7.5″

A wireless full-colour e-paper display for the warehouse and shop floor. SP Screen shows a mimic diagram, a status summary or sensor readings designed in SmartCloud, keeps the picture without power and updates only the values that changed — for up to 10 years without charging.

SP Screen — Wireless e-ink display 7.5″

Key features

  • 7.5″ e-paper, 800 × 480, full colour (E Ink Spectra 6)
  • Picture kept without power, updates only what changed
  • Up to 10 years on the built-in battery, no charging
  • Listens to the SP Net gateway beacon, LoRaWAN as an option
  • Layout designed in SmartCloud, replaced over the air
  • Set-up by phone over NFC

Your dashboard on the wall, no wires

  • Worldwide Helium Network compatibility
  • Ready to work out of the box
  • Your brand on the screen, no logo on the case

Use Cases

Warehouse: rack fullness boardHung at the end of a rack, SP Screen shows the fill of its shelves measured by SP Level sensors: the picker sees which locations are empty without a terminal, and the board refreshes itself as stock changes.

Production: equipment statusA diagram of pumps, motors and cabinets with live values — temperature from SP Thermo and SP Flux, vibration from SP Vibro, current from SP Uni. A value outside its limits is highlighted at once.

Cold rooms and storageReadings of the SP Uni loggers inside are shown outside the cold room, with the trend and the norm band, so the staff checks the room without opening it.

Signage and information boardsRoom schedules, directions or instructions are drawn in SmartCloud; the whole layout can be replaced over the air through an SP Net gateway, and the panel shows your brand, not ours.

Technical specifications

Technical specifications
Display7.5″ e-paper (electrophoretic), 800 × 480 px, 125 dpi, active area 163.2 × 97.9 mm
ColoursFull colour (E Ink Spectra 6): black, white, yellow, red, blue, green; intermediate tones by dithering
Image without powerKept: bistable e-paper; power is used only to change the image and for radio
Image updateFull refresh about 21 s, fast about 13 s; partial refresh of the changed area; not more often than once per 180 s (urgent cells — once per 30 s)
Screen contentTemplate designed in SmartCloud: base image, data cells (numbers, text, gauges, charts, heat maps, pictures), fonts; only changed values go over the air
Template deliveryBy phone over NFC, or over the air through an SP Net gateway
Radio standardListening to the SP Net gateway beacon (single-channel, two-way) or LoRaWAN 1.0.4 Class A, EU868; automatic mode selection
ConfigurationNFC (SunPeak Devices app, Android/iOS); over the air, signed
Power sourceBuilt-in Li-MnO₂ cell 3.0 V, 10 000 mAh, not replaceable by the user
Battery lifeup to 10 years without charging (depends on the number of updates)
Operating temperature0…+40 °C, indoors; storage −25…+70 °C

SmartCloud Ecosystem

Screen designerBuild the screen in SmartCloud from objects and groups: numbers, gauges, charts and heat maps bind to device channels; the preview is exactly what the panel will show.

Live valuesWhen a reading changes, the cloud sends just the difference — a few bytes per cell; the panel redraws only the changed area, and an alarm cell is shown at once.

Replace over the airChange the whole template from the office: it is delivered through the SP Net gateway at a speed chosen by link quality, and the screen switches over when it has the complete package.

Battery and signalSmartCloud counts the energy of every update and radio session, shows the remaining charge and the beacon signal for each screen.

SP Screen — documents and ordering

SP Screen — frequently asked questions

How long does the battery last?

Up to 10 years without charging. The display uses power only to change the picture and for short radio sessions; listening to an SP Net gateway beacon is the most economical mode. Frequent full-screen changes shorten the life; SmartCloud shows the remaining charge for every screen.

What can SP Screen show?

Anything you design in SmartCloud: a base picture, numbers and text, gauges, charts, heat maps and pictures bound to the channels of your devices and objects. Full colour (E Ink Spectra 6) — black, white, yellow, red, blue and green — with intermediate tones by dithering.

Does the picture stay when the power is off?

Yes. E-paper is bistable: the image remains visible without power. The panel is refreshed at least once a day so that the picture stays clean.

How fast does a new value appear?

The panel is updated not more often than once per 3 minutes so that the e-paper lasts; cells marked as urgent are shown within 30 seconds. A full refresh takes about 21 seconds, a partial one only redraws the changed area.

Which network does SP Screen use?

In a building with an SP Net gateway the screen listens to the gateway beacon and receives updates in its own time slots — this is what makes years of battery life possible. Without SP Net it works over LoRaWAN.

How is the layout changed?

In SmartCloud. The first template can be loaded by phone over NFC; after that the whole layout can be replaced over the air through the SP Net gateway, without visiting the site.

Is there a SunPeak logo on the device?

No. SP Screen is white label: the case carries no logo, and the screen shows your own design and brand.

What is the part number?

SP Screen 7.5″ (wireless e-ink display) is ordered from SunPeak Innovations under part number SP967.