SP Act

SunPeak Labs

Part number:SP900

Wireless Load Control Relay

Intelligent LoRaWAN radio relay (Class C) for remote control of electrical appliances up to 10A. Features grid parameter monitoring, integrated protections, and hardware timers in a sealed, flame-retardant enclosure.

SP Act — Wireless Load Control Relay

Key features

  • 230V AC Load Control up to 10A
  • Instant Command Execution (LoRaWAN Class C)
  • Hardware Timers for Autonomous Return
  • Power Grid Monitoring (V, A, W)
  • Built-in Overvoltage and Overcurrent Protection
  • Sealed, Flame-Retardant Enclosure (IP65)

Control Remotely and Monitor the Grid.

  • Worldwide Helium Network compatibility
  • Ready to work out of the box
  • 3 years warranty period

How it works?

SP Act system diagram: sensors connect to the SP Act logger, which relays data over LoRaWAN to SP SmartCloud

Application Scenarios

Lighting ManagementIntegration into ASUNO systems. SP Act allows for remote or scheduled switching of lighting phases via SmartCloud. Works perfectly with the SP Light lux meter, automatically closing the circuit when natural light levels drop.

Agro-IndustryAutomate irrigation for greenhouses and fields. On a command from SmartCloud, the SP Act relay opens the solenoid valve or starts the pump. The integrated timer function allows setting an exact run time (e.g., 30 minutes of watering), after which the relay autonomously disconnects the load.

Industrial AutomationRemote control of conveyors, ventilation, and gate valves.

Technical Specifications

The warranty period is 3 years. Requires professional installation by a qualified electrician.

Technical Specifications
Switched Load230V AC / 10A
Device ClassLoRaWAN Class C (Instant response)
Network ProtectionOvercurrent and overvoltage protection
Dimensions and Weight100 x 50 x 40 mm / 150 grams
ExecutionSealed, flame-retardant

SmartCloud Ecosystem

Automation and TriggersLink SunPeak sensors with the SP Act radio relay. Configure 'If-Then' logic directly in SmartCloud: for example, activate ventilation if the temperature on SP Uni exceeds 30°C.

Autonomous TimersWhen sending an activation command, you can set a hardware timer (e.g., 15 minutes). SP Act will switch on the load and is guaranteed to disconnect it after the set time at the hardware level, even if the server connection is lost.

Power Grid MonitoringSP Act doesn't just control—it measures. Charts for current consumption, network voltage, and active power are available in the dashboard, along with protection trip history (OVP/OCP).

SP Act — documents and ordering

SP Act — frequently asked questions

Is SP Act compatible with standard LoRaWAN networks?

Yes. SP Act operates on LoRaWAN Class C (Instant response), so it works with any LoRaWAN network server supporting the same specification.

Can SP Act be installed outdoors?

The network protection of SP Act is: Overcurrent and overvoltage protection.

How big is SP Act?

SP Act dimensions and weight: 100 x 50 x 40 mm / 150 grams.

What current can SP Act handle?

The switched load of SP Act is 230V AC / 10A.

What is the part number for SP Act?

SP Act (Wireless Load Control Relay) is ordered from SunPeak Innovations under part number SP900.

Where is SP Act used?

SP Act is deployed in Lighting Management, Agro-Industry and Industrial Automation.